Komatsu SK714-5 Skid-Steer Loader Operation & Maintenance Manual (37AF00004 and up) - WEAM003301

This manual PDF download describes procedures for operation, handling, lubrication, maintenance, checking, and adjustment for the SK714-5 Komatsu Skid-Steer Loader (SN: 37AF00004 and up). It will help the operator or anyone realize peak performance through effective, economical and safe machine operation and maintenance.


APPLICABLE MODELS :

Komatsu SK714-5 Skid-Steer Loader
Serial Numbers : 37AF00004 and up


TABLE OF CONTENTS :

- SAFETY AND ACCIDENT PREVENTION
- DESCRIPTION AND USE OF THE MACHINE
- MAINTENANCE
- TECHNICAL SPECIFICATIONS
- AUTHORIZED OPTIONAL EQUIPMENT


MANUAL SPECIFICATION :

File Format : PDF
Language : English
Bookmarked : Yes
Searchable : Yes
Printable : Yes
Product Code : WEAM003301
Total Pages : 232


This manual provides rules and guidelines which will help you use this machine safely and effectively. The precautions in this manual must be followed at all times when performing operation and maintenance.

Instant Download means there is NO shipping costs or waiting for a CD or paper manual to arrive in the mail! You will receive this manual TODAY via Instant Download on completion of payment via our secure payment processor. We accept ALL major credit/debit cards/paypal.

This page sometime can be found use following keyword : service manual, repair manual, workshop manual, technical manual, owner manual, operating manual, maintenance manual, parts manual. Please make sure you read and understand the title of this manual before decided to buy.

-

COVER
1.1 FOREWORD
1.2 INFORMATION ON SAFETY
1.3 INTRODUCTION
1.3.1 INTENDED USES
1.3.2 IMPROPER OR UNAUTHORIZED USES
1.3.3 MAIN CHARACTERISTICS
1.3.4 RUNNING-IN
1.4 PRODUCT IDENTIFICATION
1.4.1 MACHINE SERIAL NUMBER
1.4.2 MACHINE IDENTIFICATION PLATE
1.4.3 ENGINE SERIAL NUMBER AND EXHAUST GAS EMISSION PLATE
1.4.4 TRAVEL REDUCTION GEAR SERIAL NUMBER
1.4.5 CAB SERIAL NUMBER
1.4.6 EXCAVATOR IDENTIFICATION PLATE (if installed)
1.4.7 SERIAL NUMBERS AND DEALER’S ADDRESS

TABLE OF CONTENTS

2.1 SAFETY, NOISE AND VIBRATION PLATES
2.1.1 POSITION OF THE SAFETY PLATES
2.1.1.1 SAFETY PLATES
2.1.1.2 SAFETY PLATES FOR MACHINES WITH EXCAVATOR
2.1.2 PICTOGRAMS AND RELEVANT MEANINGS
2.1.3 POSITION OF THE NOISE PLATES
2.1.4 VIBRATIONS TO WHICH THE OPERATOR IS SUBJECTED
2.2 GENERAL PRECAUTIONS
2.2.1 GENERAL SAFETY RULES
2.2.2 SAFETY DEVICES AND GUARDS
2.2.3 CLOTHING AND PERSONAL PROTECTION ITEMS
2.2.4 UNAUTHORIZED MODIFICATIONS
2.2.5 LEAVING THE OPERATORS SEAT
2.2.6 GETTING ON AND OFF THE MACHINE
2.2.7 CHECKING THE REAR-VIEW MIRRORS (if installed)
2.2.8 PREVENTING FIRES DUE TO FUEL AND OIL
2.2.9 PREVENTING BURNS
2.2.10 PREVENTING DAMAGE DUE TO ASBESTOS POWDER
2.2.11 PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT
2.2.12 FIRE EXTINGUISHERS AND FIRST AID KIT
2.2.13 PRECAUTIONS CONCERNING THE CAB STRUCTURE
2.2.14 PRECAUTIONS CONCERNING THE EQUIPMENT
2.3 PRECAUTIONS TO BE TAKEN BEFORE STARTING THE ENGINE
2.3.1 SAFETY ON THE WORK SITE
2.3.2 FIRE PREVENTION
2.3.3 PRECAUTIONS TO BE TAKEN FOR THE OPERATOR'S CAB
2.3.4 ROOM VENTILATION
2.3.5 PRECAUTIONS TO BE TAKEN FOR THE LIGHTS (if installed)
2.3.6 CLEANING THE WINDOWS AND THE REAR-VIEW MIRRORS - CHECKING THE WINDSHIELD WIPER BLADES (if i...
2.4 PRECAUTIONS TO BE TAKEN WHEN WORKING
2.4.1 STARTING THE ENGINE
2.4.2 RULES TO BE FOLLOWED WHEN TRAVELLING ON ROADS
2.4.3 CHECKS FOR TRAVELLING IN REVERSE
2.4.4 MOVING THE MACHINE
2.4.5 WORKING ON SLOPES
2.4.6 PREVENTING ELECTROCUTION
2.4.7 VISIBILITY
2.4.8 WORKING ON ICY OR SNOW-COVERED SURFACES
2.4.9 PREVENTING DAMAGE CAUSED BY THE WORK EQUIPMENT
2.4.10 WORKING ON LOOSE GROUND
2.4.11 PARKING THE MACHINE
2.5 TRANSPORTING THE MACHINE ON OTHER VEHICLES
2.5.1 LOADING AND UNLOADING THE MACHINE
2.5.2 THE ROUTE
2.6 BATTERY
2.6.1 SAFETY PRECAUTIONS FOR WORK ON BATTERIES
2.6.2 STARTING WITH BOOSTER CABLES
2.7 PRECAUTIONS FOR EMERGENCY RECOVERY
2.8 PRECAUTIONS TO BE TAKEN DURING MAINTENANCE
2.8.1 WARNING PLATES
2.8.2 TOOLS
2.8.3 PERSONNEL
2.8.4 EQUIPMENT
2.8.5 WORKING UNDER THE MACHINE
2.8.6 KEEPING THE MACHINE CLEAN
2.8.7 USE OF THE ENGINE DURING MAINTENANCE
2.8.8 PERIODICAL CHANGE OF THE PARTS THAT ARE CRITICAL FOR SAFETY
2.8.9 STOP THE ENGINE BEFORE CARRYING OUT ANY MAINTENANCE OPERATION OR INSPECTION
2.8.10 RULES FOR REFUELLING AND ADDING OIL
2.8.11 CHECKING THE COOLANT LEVEL IN THE RADIATOR
2.8.12 USING LAMPS
2.8.13 PRECAUTIONS CONCERNING THE BATTERY AND THE ALTERNATOR
2.8.14 PRECAUTIONS CONCERNING THE STARTER
2.8.15 PRECAUTIONS CONCERNING HIGH-PRESSURE HOSES
2.8.16 PRECAUTIONS TO BE TAKEN WHEN WORKING ON HIGH-PRESSURE SYSTEMS
2.8.17 PRECAUTIONS FOR MAINTENANCE WORK INVOLVING HIGH TEMPERATURES AND PRESSURES
2.8.18 COOLING FAN AND FAN BELT
2.8.19 WASTE MATERIALS
2.8.20 PRECAUTIONS TO BE TAKEN WHEN INFLATING THE TYRES
2.8.21 PRECAUTIONS TO BE TAKEN WHEN USING THE SYNTHETIC BIODEGRADABLE OIL TYPE «HEES»

3.1 SAFETY LOCKS
3.1.1 LOADER LOCKS
3.1.2 EXCAVATOR LOCKS (if installed)
3.1.3 ASPHALT CUTTER LOCKS (if installed)
3.2 GENERAL VIEWS
3.2.1 FRONT GENERAL VIEW
3.2.2 REAR GENERAL VIEW
3.2.3 CAB INSIDE GENERAL VIEW
3.3 INSTRUMENTS AND CONTROLS
3.3.1 INSTRUMENTS
3.3.2 WARNING LIGHTS
3.3.3 SWITCHES UND PUSH BUTTONS
3.3.4 ELECTRICAL ACCESSORIES
3.3.5 MACHINE CONTROLS
ISO PATTERN CONTROL SYSTEM
OPTIONAL PATTERN CONTROL SYSTEM
3.4 FUSES AND RELAYS
3.4.1 MACHINE FUNCTION FUSES
STANDARD VERSION
VERSION WITH OPTIONALS
3.4.2 MAIN FUSE
3.4.3 RELAYS
3.5 GUARDS AND DRIVER’S SEAT
3.5.1 ENGINE HOOD
3.5.2 REAR PANEL
3.5.3 CAB
3.5.3.1 RAISING THE CAB
3.5.4 STANDARD SEAT
3.5.5 CUSHIONED SEAT
3.5.6 SAFETY BELT
3.5.7 EMERGENCY EXIT
3.5.8 TECHNICAL DOCUMENTATION CASE
3.5.9 FIRE EXTINGUISHER
3.5.10 FIRST AID KIT
3.6 USE OF THE MACHINE
3.6.1 CHECKS BEFORE STARTING THE ENGINE
3.6.1.1 VISUAL CHECKS
3.6.1.2 DAILY CHECKS
3.6.1.3 OPERATIONAL CHECKS
3.6.2 STARTING THE ENGINE
3.6.2.1 STARTING WITH WARM ENGINE OR IN TEMPERATE CLIMATES
3.6.2.2 STARTING WITH COLD ENGINE OR IN COLD CLIMATES
3.6.3 WARMING THE ENGINE
3.6.4 HEATING THE HYDRAULIC OIL
3.6.5 HOW TO MOVE THE MACHINE (ISO PATTERN CONTROL SYSTEM)
3.6.5.1 STEERING (CHANGING DIRECTION)
3.6.6 HOW TO MOVE THE MACHINE (OPTIONAL PATTERN CONTROL SYSTEM)
3.6.6.1 STEERING (CHANGING DIRECTION)
3.6.7 MOVING ON SLOPES
3.6.8 MAXIMUM IMMERSION DEPTH
3.7 PARKING THE MACHINE
3.7.1 PARKING ON LEVEL GROUND
3.7.2 PARKING ON SLOPES
3.8 STOPPING THE ENGINE
3.9 TRANSPORTING THE MACHINE ON OTHER VEHICLES
3.9.1 LOADING AND UNLOADING THE MACHINE
3.9.2 TRANSPORT
3.10 HOW TO LIFT THE MACHINE
3.11 PRECAUTIONS TO BE TAKEN IN THE COLD SEASON
3.11.1 FUEL AND LUBRICANTS
3.11.2 COOLANT
3.11.3 BATTERY
3.11.4 OTHER PRECAUTIONS
3.11.5 PRECAUTIONS TO BE TAKEN AT THE END OF WORK
3.12 PRECAUTIONS TO BE TAKEN IN THE WARM SEASON
3.13 USING THE WORK EQUIPMENT
3.13.1 LOWERING THE EQUIPMENT IN CASE OF MACHINE FAILURE
3.13.2 ORGANIZING THE WORK AREA
3.13.3 LOADING MATERIAL ON HEAPS AND ON LEVEL SURFACES
3.13.4 LOADING MATERIAL ON SLOPES
3.13.5 DIGGING METHOD
3.13.6 CHANGING THE BUCKET WITH STANDARD RAPID COUPLING
3.13.6.1 RELEASING THE BUCKET
3.13.6.2 COUPLING THE BUCKET
3.13.7 CHANGING THE BUCKET WITH OPTIONAL RAPID COUPLING
3.13.7.1 RELEASING THE BUCKET
3.13.7.2 COUPLING THE BUCKET
3.13.7.3 CHECKING THE POSITION OF THE LOCKING PINS
3.13.7.4 ADJUSTING THE LOCKING PINS
3.14 LONG PERIODS OF INACTIVITY
3.14.1 BEFORE THE PERIOD OF INACTIVITY
3.14.2 DURING THE PERIOD OF INACTIVITY
3.14.3 AFTER THE PERIOD OF INACTIVITY
3.15 TROUBLESHOOTING
3.15.1 HOW TO REMOVE THE MACHINE
3.15.2 IF THE FUEL HAS BEEN COMPLETELY DEPLETED
3.15.3 IF THE BATTERY IS DEPLETED
3.15.3.1 STARTING WITH BOOSTER CABLES
3.15.4 OTHER TROUBLES
3.15.4.1 ELECTRICAL CIRCUIT
3.15.4.2 HYDRAULIC SYSTEM
3.15.4.3 ENGINE
3.15.4.4 HYDROSTATIC TRANSMISSION

4.1 GUIDE TO MAINTENANCE
4.2 MAINTENANCE NOTES
4.2.1 NOTES REGARDING THE ENGINE
4.2.1.1 ENGINE OIL
4.2.1.2 COOLANT
4.2.1.3 FUEL
4.2.2 NOTES REGARDING THE HYDRAULIC SYSTEM
4.2.3 NOTES REGARDING THE ELECTRICAL SYSTEM
4.2.4 NOTES REGARDING LUBRICATION
4.2.5 PARTS SUBJECT TO WEAR THAT PERIODICALLY NEED CHANGING
4.3 FUEL, COOLANT AND LUBRICANTS
4.3.1 HOMOLOGATED SYNTHETIC BIODEGRADABLE LUBRICANTS TYPE HEES
4.4 DRIVING TORQUES FOR SCREWS AND NUTS
4.4.1 STANDARD DRIVING TORQUES
4.4.2 SPECIFIC DRIVING TORQUES
4.5 LUBRICATION
4.5.1 LUBRICATION DIAGRAM
4.6 PERIODICAL CHANGE OF THE COMPONENTS CONNECTED WITH SAFETY
4.6.1 CRITICAL PARTS FOR SAFETY
FUEL SUPPLY SYSTEM
STANDARD HYDRAULIC SYSTEM
HIGH-FLOW HYDRAULIC SYSTEM
OPERATORíS SAFETY
4.7 MAINTENANCE PLAN
4.7.1 WHEN REQUIRED
4.7.1.a CHECKING, CLEANING OR CHANGING THE AIR CLEANER CARTRIDGE
4.7.1.b TYRE ROTATION
4.7.1.c DRAINING THE FUEL TANK
4.7.1.d RELEASING THE PARKING BRAKE
4.7.2 CHECKS BEFORE STARTING
4.7.2.a VARIOUS CHECKS
4.7.2.b CHECKING THE COOLANT LEVEL
4.7.2.c CHECKING THE FUEL LEVEL
4.7.2.d CHECKING THE ENGINE OIL LEVEL
4.7.2.e CHECKING THE OIL LEVEL IN THE HYDRAULIC CIRCUIT
4.7.2.f CHECKING THE FUEL FILTER FOR SEDIMENTS AND WATER
4.7.2.g CHECKING THE WIRING SYSTEM
4.7.3 MAINTENANCE AFTER THE FIRST 50 HOURS OF OPERATION
4.7.4 MAINTENANCE EVERY 50 HOURS OF OPERATION
4.7.4.a CHECKING THE TYRE PRESSURE
4.7.4.b CHECKING THE COOLANT LEVEL IN THE RADIATOR
4.7.5 MAINTENANCE AFTER THE FIRST 250 HOURS OF OPERATION
4.7.6 MAINTENANCE EVERY 250 HOURS OF OPERATION
4.7.6.a ADJUSTING THE FAN BELT TENSION
4.7.6.b CHECKING THE BATTERY ELECTROLYTE LEVEL
4.7.6.c CHECKING THE GEARING CHAIN TENSION
ADJUSTING THE CHAINS
4.7.6.d CLEANING THE OUTSIDE OF THE RADIATORS
4.7.6.e CHECKING THE WHEEL NUT DRIVING TORQUE
4.7.6.f CHECKING THE OIL LEVEL IN THE FINAL TRANSMISSIONS
4.7.6.g LUBRICATING THE JOINTS
EQUIPMENT LUBRICATION POINTS
4.7.6.h CHANGING THE ENGINE OIL
4.7.6.j CHANGING THE ENGINE OIL FILTER
4.7.7 MAINTENANCE AFTER THE FIRST 500 HOURS OF OPERATION (Only for machines filled with synthetic...
4.7.8 MAINTENANCE EVERY 500 HOURS OF OPERATION
4.7.8.a CHANGING THE FUEL FILTER
4.7.8.b CHANGING THE HYDRAULIC OIL DRAIN FILTER
4.7.8.c CHANGING THE FUEL PUMP PRECLEANER
4.7.8.d DRAINING THE HYDRAULIC OIL TANK (Only for machines filled with synthetic biodegradable oi...
4.7.9 MAINTENANCE EVERY 1000 HOURS OF OPERATION
4.7.9.a CHANGING THE OIL IN THE FINAL TRANSMISSION
4.7.9.b CHANGING THE HYDRAULIC SYSTEM OIL AND CLEANING THE SUCTION FILTER
4.7.9.c CHECKING AND ADJUSTING THE ENGINE VALVE CLEARANCE
4.7.10 MAINTENANCE EVERY 2000 HOURS OF OPERATION
4.7.10.a CHANGING THE COOLANT
4.7.10.b CHANGING THE SUCTION FILTER
4.7.10.c CHECKING THE ALTERNATOR AND THE STARTER

5.1 TECHNICAL DATA
5.1.1 STANDARD MACHINE OVERALL DIMENSIONS
OVERALL DIMENSIONS WITH STANDARD BUCKET L 1550 AND TYRES (10x16.5)
OVERALL DIMENSIONS WITH BUCKET L 1460 AND TYRES (7.00x16.5)
OVERALL DIMENSIONS WITH BUCKET L 1730 AND TYRES (10x16.5)
5.1.2 MACHINE OVERALL DIMENSIONS WITH OPTIONAL EQUIPMENT
MACHINE OVERALL DIMENSIONS WITH EXCAVATOR (E30)
MACHINE OVERALL DIMENSIONS WITH ASPHALT CUTTER
5.1.3 TECHNICAL CHARACTERISTICS

6.1 AUTHORIZED OPTIONAL EQUIPMENT
6.1.1 PRECAUTIONS REGARDING SAFETY
6.1.2 PRECAUTIONS REGARDING THE INSTALLATION OF EQUIPMENT
6.1.3 CHARACTERISTICS OF THE STANDARD MACHINE OPTIONAL EQUIPMENT
6.1.4 CHARACTERISTICS OF THE OPTIONAL EQUIPMENT OF THE MACHINE VERSION WITH HIGH-FLOW HYDRAULIC S...
6.2 CHANGING THE AUTHORIZED EQUIPMENT
6.2.1 CONNECTING THE EXCAVATOR
6.2.2 CONNECTING THE HYDRAULIC CIRCUIT
6.2.3 CONNECTING THE RETURN CIRCUIT WITH DIRECT DRAINAGE INTO THE TANK
6.2.4 PREPARING THE MACHINE FOR THE USE OF THE EXCAVATOR
6.2.5 USING THE MACHINE WITH THE EXCAVATOR
6.3 PALLET FORKS

-