Kubota BX25DLB, LA240A & BT602 Tractor Operators Manual

-
This manual PDF download describes procedures for operation, handling, lubrication, maintenance, checking, and adjustment for the BX25DLB, LA240A & BT602 Kubota Tractor. It will help the operator or anyone realize peak performance through effective, economical and safe machine operation and maintenance.


APPLICABLE MODELS :

Kubota Tractor BX25DLB
Kubota Tractor LA240A
Kubota Tractor BT602
    

MANUAL SPECIFICATION :

File Format : PDF
Language : English
Printable : Yes
Searchable : Yes
Code No. : K2792-7121-4
Total Pages : 143


This manual provides rules and guidelines which will help you use this machine safely and effectively. The precautions in this manual must be followed at all times when performing operation and maintenance.
    
-

TABLE OF CONTENTS :

    SERVICING
    SPECIFICATIONS OF THE TRACTOR
        SPECIFICATION TABLE
        TRAVELING SPEEDS
    SPECIFICATIONS OF THE LOADER
        LOADER SPECIFICATIONS
        BUCKET SPECIFICATIONS
        DIMENSIONAL SPECIFICATIONS
        OPERATIONAL SPECIFICATIONS
        LOADER TERMINOLOGY
    SPECIFICATIONS OF THE BACKHOE
        BACKHOE SPECIFICATIONS
            B Dimensions
            B Specifications
        BACKHOE TERMINOLOGY
    IMPLEMENT LIMITATIONS
    INSTRUMENT PANEL AND CONTROLS
    PRE-OPERATION CHECK OF THE TRACTOR
        DAILY CHECK
    PRE-OPERATION CHECK OF THE LOADER
        LUBRICATION
        TRANSMISSION FLUID
        REAR BALLAST
            B Liquid Ballast in Rear Tires
        TIRE INFLATION
        TEST OPERATION
        REMOVING AIR FROM HYDRAULIC SYSTEM
    PRE-OPERATION CHECK OF THE BACKHOE
        PRE-OPERATION CHECKS
        OPERATOR'S SEAT
        BALLAST
        TIRE INFLATION
    OPERATING THE ENGINE
        STARTING THE ENGINE
            B Cold Weather Starting
            B Block Heater (Option)
        STOPPING THE ENGINE
        WARMING UP
            B Warm-up and Transmission Oil in the Low Temperature Range
        JUMP STARTING
    OPERATING THE TRACTOR
        OPERATING NEW TRACTOR
            B Do not Operate the Tractor at Full Speed for the First 50 Hours.
            B Changing Lubricating Oil for New Tractors
        BOARDING AND LEAVING THE TRACTOR
        OPERATING FOLDABLE ROPS
            B To Fold the ROPS
            B To Raise the ROPS to Upright Position
            B Adjustment of Foldable ROPS
        STARTING
            B Operator's Seat
            B Seat Belt
            B Head Light Switch
            B Hazard Light Switch
            B Turn Signal Light Switch
            B Brake Pedal
            B Range Gear Shift Lever (Hi-Lo)
            B Front Wheel Drive Lever
            B Hand Throttle Lever
            B Parking Brake Pedal
            B Speed Control Pedal
            B Speed Set Device
        STOPPING
            B Stopping
        CHECK DURING DRIVING
            B Immediately Stop the Engine if:
            B Easy Checker(TM)
            B Fuel Gauge
            B Coolant Temperature Gauge
            B Hourmeter/Tachometer
        PARKING
            B Parking
        ACCESSORY
            B 12V Electric Outlet
            B Glove Box
        OPERATING TECHNIQUES
            B Differential Lock
            B Operating the Tractor on a Road
            B Operating on a Slopes and Rough Terrain
            B Transport the Tractor Safely
            B Directions for Use of Power Steering
        REVERSING THE SEAT
    PTO
        PTO OPERATION
            B PTO Select Lever
            B PTO Clutch Lever
            B PTO Shaft Cover and Shaft Cap
            B Stationary PTO
            B PTO Drive Shaft
    3-POINT HITCH & DRAWBAR
        3-POINT HITCH
            B Attaching and detaching implements
            B Lifting Rod (Right)
            B Top Link
            B Check Chains
        HITCH
            B Removing the 3-Point Hitch
            B Installing the 3-Point Hitch
    HYDRAULIC UNIT
        3-POINT HITCH CONTROL SYSTEM
            B Hydraulic Control
            B 3-point Hitch Lowering Speed
        AUXILIARY HYDRAULICS
            B Hydraulic Outlet
        INSTALLING MOWER
        MOWER LIFT LINKAGE SYSTEM
            B Cutting Height Control Dial
            B Hydraulic Control Unit Use Reference Chart
    TIRES, WHEELS AND BALLAST
        TIRES
            B Inflation Pressure
            B Dual Tires
        WHEEL TREAD
            B Front Wheels
            B Rear Wheels
        BALLAST
            B Front Ballast
            B Rear Ballast
    OPERATING THE LOADER
        FILLING THE BUCKET
        LIFTING THE LOAD
        CARRYING THE LOAD
        DUMPING THE BUCKET
        LOWERING THE BUCKET
        OPERATING WITH FLOAT CONTROL
        LOADING FROM A BANK
        PEELING AND SCRAPING
        LOADING LOW TRUCKS OR SPREADERS FROM A PILE
        BACKFILLING
        HANDLING LARGE HEAVY OBJECTS
        VALVE LOCK
        ATTACHING ATTACHMENTS
        DETACHING ATTACHMENTS
        DISMOUNTING THE LOADER
        ATTACHMENTS
            B Bucket
            B Pallet fork
        ASSEMBLE PALLET FORK
    OPERATING THE BACKHOE
        OPERATING SPEED
        BACKHOE CONTROLS
            B Boom & Swing Lever
            B Dipperstick & Bucket Lever
            B Stabilizer Control Levers
        PLACING THE STABILIZERS
        GENERAL BACKHOE OPERATION
            B Dipperstick Digging
            B Spoil Pile Location
            B Straight Wall or Cemetery Digging
            B Stabilizer pads (Standard)
            B Stabilizer pads (Option)
        TRANSPORTING
            B Driving to the Job-site
            B Trailer Transporting
    MAINTENANCE OF THE TRACTOR
        SERVICE INTERVALS
        LUBRICANTS, FUEL AND COOLANT
    PERIODIC SERVICE OF THE TRACTOR
        HOW TO OPEN THE HOOD
            B Hood
            B Engine Cover
        DAILY CHECK
            B Walk Around Inspection
            B Checking and Refueling
            B Checking Engine Oil Level
            B Checking Transmission Fluid Level
            B Checking Coolant Level
            B Cleaning Panel and Radiator Screen
            B Checking Brake Pedal
            B Checking Gauges, Meters and Easy Checker(TM)
            B Checking Head Light, Hazard Light etc.
            B Checking Seat Belt and ROPS
            B Checking and Cleaning of Electrical Wiring and Battery Cables
            B Checking Movable Parts
        EVERY 50 HOURS
            B Lubricating Grease Fittings
            B Checking Engine Start System
            B Checking OPC System
            B Checking Wheel Bolt Torque
        EVERY 100 HOURS
            B Battery
            B Cleaning Air Cleaner Element
            B Checking Fuel Filter
            B Adjusting Fan belt Tension
            B Adjusting HST Neutral Spring (for Speed Control Pedal)
            B Adjusting Brake Pedal
        EVERY 200 HOURS
            B Replacing Engine Oil Filter
            B Changing Engine Oil
            B Replacing Transmission Oil Filter
            B Adjusting Toe-in
        EVERY 400 HOURS
            B Adjusting Front Axle Pivot
            B Changing Transmission Fluid
            B Cleaning Transmission Strainer
            B Changing Front Axle Case Oil
            B Replacing Fuel Filter Element
        EVERY 800 HOURS
            B Adjusting Engine Valve Clearance
        EVERY 1000 HOURS OR 1 YEAR
            B Replacing Air Cleaner Element
        EVERY 1500 HOURS
            B Checking Fuel Injection Nozzle Injection Pressure
        EVERY 2000 HOURS OR 2 YEARS
            B Flushing Cooling System and Changing Coolant
            B Anti-Freeze
        EVERY 3000 HOURS
            B Checking Injection Pump
        EVERY 1 YEAR
            B Checking Radiator Hoses and Clamps
            B Checking Power Steering Line
            B Checking Fuel Lines
            B Checking Intake Air Line
            B Checking Engine Breather Hose
        EVERY 4 YEARS
            B Replacing Radiator Hose (Water pipes)
            B Replacing Power Steering Hose
            B Replacing Fuel Lines
            B Replacing Engine Breather Hose
            B Replacing Intake Air Line
        SERVICE AS REQUIRED
            B Bleeding Fuel System
            B Replacing Fuse
            B Replacing Light Bulb
    MAINTENANCE OF THE LOADER
        LUBRICATION
        RE-TIGHTENING OF HARDWARE
            B Tightening Bolts and Nuts
        DAILY CHECKS
        EVERY 50 HOURS
            B Checking main frame bolt and nut torque
    MAINTENANCE OF THE BACKHOE
        DAILY CHECKS
        LUBRICATION
        BUCKET SERVICE
            B Changing the Backhoe Bucket
            B Changing the Bucket Teeth
            B General torque specification
    STORAGE OF THE TRACTOR
        TRACTOR STORAGE
        REMOVING THE TRACTOR FROM STORAGE
    REMOVING THE LOADER
        STORAGE OF THE LOADER
    REINSTALLING THE LOADER
    REMOVING THE BACKHOE
        REMOVAL OF THE BACKHOE
        STORAGE OF THE BACKHOE
    REINSTALLING THE BACKHOE
    TROUBLESHOOTING
        ENGINE TROUBLESHOOTING
    OPTIONS
    APPENDICES
        INDEX
        
-